DentistryOnline courseProsthodontics
Nate Farley and Kent Howell build an AOX Crystal Ultra hybrid — every clinical and lab step
In AOX Crystal Ultra Hybrid Restoration – ALL Clinical & Lab Steps Start to Finish, Arizona prosthodontists Nate Farley and Kent Howell take one patient from final impression to insertion. Over 11 lessons and under four hours, they alternate chairside and laboratory work to bond a Crystal Ultra nano-ceramic superstructure onto a non-metal Pekkton or Trilor frame.
- 4modules
- 11lessons
- 3 h 43 minof teaching
What you’ll be able to do
- Understand where Crystal Ultra sits between acrylic and zirconia
- Take the final impression and pour, mount and scan the case
- Design the bar and teeth in a digital workflow
- Bond teeth to the frame and finish with pink composite and glaze
- Deliver the prosthesis with a proper bite check
Inside the course
A material between two worlds
Crystal Ultra is a nano-ceramic that is far stronger than acrylic yet needs a bonded frame to succeed. The course shows how pairing it with Pekkton or Trilor gives strength from the combination of parts.
Clinical and lab in lockstep
Each chairside step is followed by the laboratory work that prepares the next appointment — impression, pour and mount, scan, then CAD of the bar and teeth.
Finishing and delivery
Cleaning and bonding the teeth to the bar, smoothing the transition, adding pink composite, glazing, and a final insertion with bite verification.
About the instructors
Both are board-certified prosthodontists in Mesa, Arizona. Farley trained at Ohio State with a strong digital focus; Howell brings the added prosthodontic training that shapes complex restorative cases.
Built for
- ProsthodontistsA start-to-finish reference for hybrid fabrication with a modern material.
- Lab techniciansThe CAD and finishing steps for a bonded nano-ceramic superstructure.
- Digital-workflow adoptersAn adaptable process you can join at the step that suits your setup.
Curriculum
Module 1. First Appointment (56 min) 3 lessons
- Final impression
- Lab step: pour and mount
- Scan and return interim
Module 2. CAD (1 h 15 min) 2 lessons
- Design the bar
- Design the teeth
Module 3. Finishing (1 h 14 min) 5 lessons
- Cleaning the teeth
- Bonding teeth to the bar
- Smoothing the transition and finish line
- Pink composite
- Optiglaze and finish
Module 4. Final Delivery (16 min) 1 lesson
- Insertion and bite check
Before you buy
Do I get CME credit or a certificate?
No. Clinicapedia provides the educational content only — no CME or CE credits, MOC points or certificates of completion are included with this product.
Specifications
| Format | Online video course |
|---|---|
| Instructors | Nate Farley · Kent Howell |
| Contents | 4 modules · 11 lessons |
| Duration | 3 h 43 min |
| Access | Lifetime, self-paced |
| Department | Dentistry |
| Delivery | Instant download · lifetime re-download |
Related products
Addiction Medicine
Dentistry
